Spare parts for hydrocyclones

Cones and lower stages for hydrocyclones

Hydrocyclones are used in various industries for thickening, clarification, washing of solid phase, classification of suspensions and beneficiation of natural resources. In the process of classification the working surface of the lower part of the hydrocyclone is most exposed to abrasive load, so it is a replaceable and wearable spare part.

Lower cone of the HC with ceramic lining based on A/203.

Ceramic insert for the lower cone of the HC.

Spare parts for hydrocyclones (nozzles)

During operation the working surface of the lower part of the hydrocyclone is most exposed to significant abrasive load, therefore it is a replaceable and wearable spare part.Sand and drain nozzles can be made of silicon carbide (SiC) and aluminum oxide (A/203 92-95%) ceramics of any standard sizes on request of the Customer.

Manufacturing options

AI203 92-95% aluminum oxide nozzles without housing.

Silicon carbide SiC nozzles without housing.

Polyurethane nozzles without housing.

Nozzles in a polyurethane housing.

• Silicon carbide (SiC) sand nozzles.
• The hull is made of extra strong fiberglass.
• They have increased wear resistance combined with lighter nozzle weight, resulting in the greatest economic benefit.

Nozzles in a metal case.

Advantages

They have increased wear resistance and protect the steel parts of the hydrocyclone from wear.

They have a minimal coefficient of friction.

Not susceptible to the effects of corrosion.

Absolutely inert to aggressive media.

Average nozzle runnability under operating conditions at the mining and processing plant

Polyurethane, rubber	3-10 days
Оксид алюминия A1203 92-95%	14-30 days
Silicon carbide SiC	30-90 days.