Composite protective coatings are materials derived from several dissimilar components. They include strong reinforcing fillers and a plastic base. Compounds, unlike standard composites, they cure quickly under natural conditions without loss of volume.
Fine-grained wear-resistant compound (with free-form agents) is designed for repair and restoration of any metal surfaces subject to severe abrasion, erosion/corrosion. for repair and restoration of any metal surfaces subject to severe abrasion, erosion/corrosion.
| Material life time after mixing of components at 20 C, not less |
30 minutes |
| Strength of adhesion to metal according to GOST 14760-69, not less than |
2.32 MPa |
| Shear tensile strength, according to GOST 14759-69, not less than |
4,38 MPa |
| Shore hardness, D scale, not less than | 89 |
| Maximum operating temperature dry |
80°C |
| Maximum operating aqueous temperature |
60°C |
| Minimum operating temperature | -40°C |
| Time to reach 98% strength | 15 hr. |
| Kit | Component A and B (proportion 4:1 by weight) |
| Expenditure | 10 kg per mg at layer thickness of 5 mm |
Shelf life:
6 months from the date of issue on the package when stored at 15 °С to 30 °С and relative humidity not more than 80%.
During storage do not allow direct sunlight.
